Manufacturing
Custom car emblem manufacturing
A Guangzhou car emblem supplier for wholesale and bulk orders — die casting, electroforming, injection molding, and chrome plating in one factory.
Program facts
What a car emblem supplier should quote
MOQ from 100 pcs. Free design mockup within 24 hours. Sample production in 5–7 days. Bulk production in 2–3 weeks. Wholesale and bulk car emblem runs use these same numbers.
100 pcs
MOQ
Typical start per design
24 hours
Free mockup
After usable vector art
5–7 days
Sample
After artwork approval
2–3 weeks
Bulk
After you sign the sample
The line
How a custom car emblem is made
Match the badge to a process before you pay for tooling. The company story is onAbout.
01
Die casting
Zinc or aluminum for 3D metal letters, hood marks, and grille badges.
02
Electroforming
Thin nickel shells for detailed crests and fine logo lines.
03
Injection molding
ABS and chrome-plated plastic for high-volume, repeat SKUs.
04
Chrome & paint fill
Bright or satin chrome, paint-filled recesses, and an exterior clear coat.
Chrome buyer guide
05
Assembly & export QC
Studs or foam tape, lot check against the signed sample, then export cartons.
Which process
Which process is right for a custom car emblem?
The right process depends on the badge shape, the level of detail, and the annual quantity. Die casting suits thick 3D letters and grille badges with studs; electroforming holds hairline crest detail; injection-molded ABS with chrome gives the lowest unit cost on high-volume repeat SKUs. All three take bright or satin chrome, paint fill, and a clear coat — we confirm the route, mounting, and tooling ownership in writing during DFM.
Die casting
Metal letters & grille marks
Zinc or aluminum when the badge needs thickness, studs, and a solid metal face.
Electroforming
Fine crests & thin lines
Nickel shells when the artwork has hairline detail a casting cannot hold.
Injection molding
High-volume chrome plastic
ABS plus plating when the annual quantity justifies a mold and a repeat SKU.
| Process | Base material | Best for | Fine detail | Unit cost at volume |
|---|---|---|---|---|
| Die casting | Zinc alloy / aluminum | 3D letters, grille and hood badges | Medium | Medium |
| Electroforming | Nickel shell | Crests, hairline logos | High | Higher |
| Injection molding + chrome | ABS | High-volume repeat SKUs | Medium | Lowest |
Timeline
From DFM to the warehouse
File rules are in the artwork guide. Sampling cost and MOQ are in MOQ and sampling. Lead-time questions sit in the FAQ.
- 1
DFM
We confirm die cast, molding, or electroform, plus mounting, before any tool is cut.
- 2
Sample
A pre-production unit in 5–7 days. You sign color and mounting before bulk.
- 3
Bulk
Mass production after that sign-off — typically 2–3 weeks. MOQ from 100 pcs.
- 4
Export QC
Each shipment is checked against the signed sample, then packed for air or sea.
What a reorder actually locks
Car emblem wholesale and bulk reorders stay on the signed sample, so the next container matches the first.
- Repeat runs follow the signed sample for chrome, paint fill, and adhesive.
- Unchanged artwork stays on the same tool — no surprise re-tooling.
- Every shipment is checked against that sample before it leaves Guangzhou.
- Tooling ownership — yours or ours — is written on the quotation before steel is cut.
- Lead time is counted from sample approval, not from the first email.
Quote a custom car emblem program
Send licensed artwork, quantity, and destination. We reply with the process, MOQ, sampling cost, and lead time for wholesale or bulk.